Hand switch problem cannot work.

Model SM150 / SM250 / MAKINA250SP+ / MAKINA250 DUAL CAFA / MAKINA250 DUAL TRACK / SM400 / MAX 2
Observation point

 The hand switch cannot be operated normally. Or need to press the switch on the handlebar (turn signal switch High-low beam switch Switch, turn signal switch, horn switch, starter switch, OFF-RUN switch) and hold it until it works.

  Switch picture

  1. Make an injection to clean the contact’s face. In the part of the position of the switch that can not work normally.
  2. Wait for the contact cleanser to dry completely (approximately 1-2 minutes).
  3. Do a test of the switch to see if it can work normally or not.
  4. In case of cleaning the contact’s face If the switch on the handle is still not working normally, contact the motorcycle repair shop technician for service.
  1. The hand switch cannot be operated normally. Or have to press the switch on the handlebar
 
Troubleshooting parts

– Contact cleanser

 
Tools / equipment used

– without

“Can't find what you want?”