Idle system problems (soft, turn off when accelerating the accelerator pedal)

1. Start the engine Let the engine run for about 5 minutes (to keep the engine at operating temperature). Parked for a long time Or cold engine
2. Make adjustments at the idle adjustment screw. Tighten it in a clockwise direction. The engine speed will be higher.
3. Check to see if the engine stops or not when the accelerator pedal is maximized.
4. Make adjustments at the idle adjustment screw. Where the engine has idle speed And has a stable engine speed and does not stop
5. Check the speed that is within the standard engine idle = 1,400 ± 100 r / min or not. If not in the standard setting It will lead to further solutions to the problem.

Troubleshooting parts

– without

Tools / equipment used

– Small flat screwdriver